~
107
~
NOTICE!
Never
use a screwdriver to remove the cover. Remove the cover
by hand
only
! RISK OF DAMAGE!
1.
Disconnect the appliance from the mains: switch off the corresponding
fuse in the fuse box of your household power supply!
2.
Place a dishcloth in the interior of the cold oven to protect it from possible
damage.
3.
Unscrew the lamp cover anticlockwise. Clean the lamp cover and wipe it dry
thoroughly.
4.
Unscrew the illuminant from the socket and replace it with a high temperature
illuminant (300
0
C) of the
same type
.
5.
Do not use any other type of illuminant.
6.
Screw the new illuminant in. Check its proper position in the socket.
7.
Replace the lamp cover.
8.
Remove
the dishcloth
and switch on the corresponding fuse in the fuse box of
your household power supply again.
According to the EU regulation No. 244/2009, your appliance is classified as a
household appliance in accordance with the eco-design requirements for non-
directional household lamps. This means that illuminants, which are used in
household appliances, must not be used to illuminate domestic establishments.
7.4 Removing of the oven door
H
OW TO REMOVE THE OVEN DOOR
1.
Open the door and push the safety catches of
the two hinges upwards (s. fig. on the right).
2.
Close the door slightly.
4.
Lift the door and pull it towards your
direction carefully.
Summary of Contents for EBO8 DPY
Page 72: ...72 FIG 1...