60
When you do not set a power level within
1 minute
, the appliance will switch off
automatically.
H
OW TO USE THE POWER LEVEL MODE
::
1.
Touch the « O
N
/ O
FF
» sensor to switch on the hob.
2.
The display indicates «
P 0
».
P 0
3.
Place a proper cookware on the
DESIRED COOKING ZONE
.
Always keep the bottom of the cookware as well as the
cooking zone clean and dry.
4.
Select the desired cooking zone by touching the
SELECTION OF COOKING ZONE
sensor.
5.
Set the power level using the
+
and
-
sensors.
¾
Each cooking zone is equipped with 9 power levels
(P 1 - P 9).
¾
Touch
+
or
-
once to increase / decrease the power
level by
1
.
¾
Touch and hold
+
or
-
to increase / decrease the
power level by
1
in
fast mode.
P 1 - P 9
6.
When you do not set a power level within
1 minute
, the appliance will switch
off automatically. You have to start at step 1 again.
7.
While cooking, the power level can be changed
at any time
.
When «
P 0
» is indicated on the display, you can touch the «
-
» sensor once to
set the power level setting «
P 9
» directly.
3.5.2 Temperature mode (0
0
C - 600
0
C)
If the
TEMPERATURE MODE
of the hob is activated, you can set a
temperature
for the desired cooking zone. The settable temperature range of each cooking
zone is from
0
0
C
to
600
0
C
.
When the power is on, an acoustic signal sounds once; all indicators show «
P 0
».
Now the appliance has entered the stand-by mode.
Summary of Contents for EB-DCF2X
