~ 79 ~
7.
If you want to switch off the extractor hood, proceed as follows.
a.
Set the power level (motor speed) to «
0
» using the «
D
ECREASE
» -
SENSOR
. If the illumination is on, switch it off using the sensor
« D
ECORATIVE
ILLUMINATION
»
and / or the sensor
« I
LLUMINATION
».
b.
The digital display indicates the power level «
0
»; the motor is off.
c.
The appliance switches off (standby mode) and the indicator of the
«
D
ECREASE
»
-
SENSOR
changes to backlight mode; you can also switch off
the appliance using the « O
N
/ O
FF
» -
SENSOR
.
18
d.
The appliance is now in
STANDBY MODE
.
To switch off the extractor hood, you
must
always
set the power level (motor
speed) to «
0
» using the «
D
ECREASE
» -
SENSOR
.
D
IGITAL DISPLAY
❖
The digital display indicates the currently set power level (motor speed).
❖
If
no sensor
is touched
within
2 minutes
after
the appliance is switched on, the
DIGITAL DISPLAY
and the indicators of the sensors « D
ECORATIVE
ILLUMINATION
»,
« D
ECREASE
»,
« I
NCREASE
»
und
« I
LLUMINATION
»
go
off
.
Touch the « O
N
/ O
FF
» -
SENSOR
(= digital display «
») to
reactivate
the
digital display and the indicators of the sensors.
« D
ECREASE
» -
SENSOR
❖
Use the « D
ECREASE
» -
SENSOR
to decrease the power level (motor speed) of the
extractor hood (see also chapter 4.2.1 P
OWER LEVELS
).
« I
NCREASE
» -
SENSOR
❖
Use the «
INCREASE
» -
SENSOR
to increase the power level (motor speed) of the
extractor hood (see also chapter 4.2.1 P
OWER LEVELS
).
18
Depending on model.
