Pkm BS47-60ABTH, Instruction Manual

Page: 82 / 98

~ 82 ~
S
ETTABLE ILLUMINATION COLOURS AND COLOUR COMBINATIONS
BLUE BLUE
/
GREEN GREEN
GREEN
/
RED RED RED
/
BLUE
RED
/
BLUE
/
GREEN
S
EQUENCE OF THE ILLUMINATION COLOURS
/
COLOUR COMBINATIONS IN
SETTING MODE
(
AUTOMATIC COLOUR CHANGE
):
blue
→
blue / green
→
green
→
green / red
→
red
→
red / blue
→
red / blue / green
→
blue
→
blue / green
etc.
The colour change of the decorative illumination runs automatically. The
individual colours merge into one another gradually and change their intensity at
the same time (from light to dark or from dark to light).
After the illumination colour has changed from the combination red / blue /
green to blue, the sequence starts again from the beginning (see table above).
NOTICE! Only switch on the illumination while the appliance is operating.
4.2.1 Power levels
❖ The extractor hood is equipped with 3 power levels (= 3 motor speeds) and a
power level « 0 » (= motor is off).
❖
Use the
SENSORS
«
INCREASE
» and / or «
DECREASE
» to set the desired
power level (motor speed) of the extractor hood.
❖
The currently set power level (0 / 1 / 2 or 3) is indicated on the digital display
«
».
When you set the power level (motor speed) to « 0 » using the « D
ECREASE
» -
SENSOR
, the extractor hood returns to
STANDBY MODE
.
You must always set the power level (motor speed) to « 0 » using the
« D
ECREASE
» -
SENSOR
to switch off the extractor hood (
STANDBY MODE
).