2.2 WARNING FOR THE USER
The conditions in the surrounding area where the machine will be
installed must have the following characteristics:
the area must be dry;
the area must have water and heat sources at an adequate distance;
ventilation and lighting must be suitable and comply with the hygiene
and safety standards foreseen by current laws;
the floor must be flat and compact to facilitate thorough cleaning;
there must be no obstacles of any kind in the immediate vicinity of the
machine that could effect the machine's normal ventilation.
In addition, the user must:
make certain to keep children away from the machine when it is
operating;
adhere to the instructions in this manual.
not remove or tamper with the safety devices on the machine;
always pay careful attention to the work at hand and not use the
machine when in a distracted state;
perform all operations with maximum safety and calm;
respect the instructions and warnings displayed on the machine
labels.
The labels are accident prevention devices, and therefore must always be
perfectly legible. If these should be damaged and illegible, it is mandatory
to replace them by requesting replacements from the Manufacturer.
At the end of each working shift, before cleaning, maintenance or
transfer operations, disconnect electrical power.
2.3 WARNINGS FOR THE MAINTENANCE OPERATOR
Observe the instructions indicated in this manual.
Always use individual safety devices and other protection means.
