34
6
Saturday)
SM37 1037
Digital input filter
It is possible to filter digital input signals by
imposing a time of delay. If the state of the
input changes, the new state will be
accepted only if the input is maintained for
the imposed time. The data will become
accepted after the filter has eliminated
disturbances and fixed the lines of the inputs
on stable values.
The TD320 supports filters with times of
delay between 0 and 50ms (default 10ms).
R/W
SM38 1038
Digital inputs
Bit 0
Bit ON
Digital input DI1 active
R
Bit 1
Bit ON
Digital input DI2 active
R
Bit 2
Bit ON
Digital input DI3 active
R
Bit 3
Bit ON
Digital input DI4 active
R
Bit 4
Bit ON
Digital input DI5 active
R
Bit 5
Bit ON
Digital input DI6 active
R
Bit 6
Bit ON
Digital input DI7 active
R
Bit 7
Bit ON
Digital input DI8 active
R
SM39 1039
Conf. COM1 in mode Free-port
SM40 1040
Conf. EXP1 in mode Free-port
SM41 1041
Conf. COM2 in mode Free-port
Word that enables the serial port to function
in free-port mode and to set its parameters.
Enabling this mode, the communications
protocol using the serial port will be disabled,
allowing direct access to the functions of
transmission and reception of the data on the
port. These parameters are initialized at
startup to 0 (free-port mode disabled).
R/W
Bit 0
÷÷÷÷
3
These bits set the communication
velocity of the serial port in the free-
port mode according to the
following values (baud):
R/W
