Pixsys HMI series, Quick Start Manual

Page: 14 / 44

14 - HMI Series - User manual
11.e
BACKLIGHT - BUZZER
From this window it is possible to configure backlighting
and buzzer parameters. Enabling “Always ON” the
backlighting keeps always active. Otherwise, enter time
value in seconds on “Backlight ON for..(sec)” to enable the
switching off or the lamp attenuation.
The first two fields allows to select the lamp brightness
percentage (100% = ON, 0%=OFF) during standard
operation or standby.
“Buzzer frequency” allows to select the buzzer tone
frequency (an higher frequency corresponds to a more
acute tone). Select “Buzzer OFF” to deactivate the buzzer at
touch.
“TEST” keys allow to test selected parameters before saving
the configuration.
11.f WINVNC
From this window it is possible to enable/disable the VNC
remote Desktop service. Press “START VNC” to activate
manually this service. Press “START VNC_CONFIG” to access
VNC configuration window and set the authentication
system or modify access password. NB . Parameter
modification is recommended to expert users, incorrect
parameters modification will cause remote desktop service
malfunctioning. Default password to access remote
Desktop through VNC is “1234” .
11.g BACKUP-RESTORE
BACKUP of LogicLab and Movicon projects stored on HMI.
After downloading LogicLab and Movicon projects on HMI
and after setting the HMI for their automatic execution at
each starting, switch off the HMI and restart it keeping the
STOP icon pressed.
TDControlPanel window will be opened
Insert a USB pen (FAT32 formatted) in one of the available
USB ports.
Press BACKUP-RESTORE to access the utility for projects
backup and device configuration