User manual
- DRR245 53
14
Table of Anomaly Signals
If installation malfunctions, controller will switch off regulation output and will
report the anomaly. For example, controller will report failure of a connected
thermocouple visualizing
e-05
flashing on display for other signals, see table
below.
Cause
what to do
E-01
SYS.E
Error in EEPROM cell
programming.
Call Assistance.
E-02
SYS.E
Cold junction sensor fault or
room temperature outside of
allowed limits.
Call Assistance.
E-04
SYS.E
Incorrect configuration data.
Possible loss of calibration
values.
Check if the configuration
parameters are correct.
E-05
prb.
Thermocouple open or
temperature outside of limits.
Check the connection with the
sensors and their integrity.
E-08
SYS.E
Missing calibration data.
Call Assistance.
Summary of Contents for DRR 245
Page 1: ...Start guide DRR245 Controller...
Page 2: ......
Page 5: ......
Page 56: ...56 DRR245 User manual...
