Pixsys ATR 421, User Manual

Page: 47 / 108

ATR 421 - User manual 47
73
coo.f.
Cooling Fluid : Defi nes cooling fl uid type.
air
> Default
oiL
H2o
74
p.b.m.
Proportional Band Multiplier :
1.00…5.00 . > Default : 1.00.
75
ov.d.b.
Overlap/Dead Band :
-20.0%…50.0% . > Default : 0.0%.
76
co.c.t.
Cooling Cycle Time :
1…300 secondi. > Default : 10s.
77
rem.s.
Remote Setpoint : Selects remote setpoint mode, through
serial communication.
dis.
(Disabled). Controller operates autonomously. > Default .
sLve
(Slave). Controller is a slave normally in STOP: goes in RUN when,
on master device connected to the serial, a cycle is started.
mstr
(Master). Controller transmits the setpoint to all controllers
connected to the serial and set as slave.
78
bd.rt.
Baud Rate : Selects baud rate for serial communication.
4.8 k
4800 bit/s
9.6 k
9600 bit/s
38.4k
38400 bit/s
19.2k
19200 bit/s > Default
57.6k
57600 bit/s
28.8k
28800 bit/s
115.2
115200 bit/s
79
se.p.s.
Serial Parameters Setting : Selects data format for serial
communication.
8.n.1
8 data bits, no parity, 1 stop bit. > Default .
8.o.1
8 data bits, odd parity, 1 stop bit.
8.e.1
8 data bits, even parity, 1 stop bit.
80
sL.ad.
Slave Address : Selects slave address for serial communication.
1…254 Address for slave functioning. > Default : 254.