Pixsys ATR 421, User Manual

Page: 19 / 108

ATR 421 - User manual 19
Press Display Do
2
Decrease or Increase until
choosen cycle is visualized
cY.01
(for cycle no.1),
cY.02
(for
cycle no.2),
3
OK
or
START
STOP
Cycle starts . Buzzer sounds
for a second. Green display
shows the process while red
display shows the setpoint
introduced on parameter 29
ui.d.2.
If function “Delayed start” is enabled (see parameter 30
dE.St.
) follow the
points below:
Press Display Do
4
OK
or
START
STOP
Red display shows
wait
while green display shows the
programmed waiting time
fl ashing.
5
Increase or decrease
time for delayed start
(hours:minutes).
6
OK
Start of waiting time. At
elapsing of programmed time,
cycle will start.
Press or to modify the
time.
7.2
Fast advancement during the cycle
During functioning or after a restart it can be useful to onwards or backwards
the cycle in progress, to reach chosen setpoint value.
Press Display Do
1
or
Forwards or backwards (each
beep of internal buzzer me-
ans one minute). To stop the cycle and set
the controller in , before cycle
end press
START
STOP
for a second.