P
AGE
20
A
PPENDIX
A. G
LOSSARY
Th
Handling FireWire bus resets and device removal (e.g., when the cable is
unplugged from the camera)
e PixeLINK FireWire mini-driver exports the following functionality to the
DirectShow:
s serial bus management for the
e content (video data and camera
control signals) transmitted over the FireWire cable between the camera and the host
computer. The FireWire Bus Driver can act as the cycle master, isochronous resource
man
manager.
OHCI FireWire Driver:
This component instructs the OHCI FireWire Firmware to
ets of information via the FireWire cable.
his generic firmware is programmed on an adapter
mputer to work with FireWire. An adapter card
designed for desktop computers is included in selected PixeLINK camera kits. If the
s a FireWire port available, the card is not
e a preinstalled FireWire port or CardBus slot.
era User's Manual for more information.
rest of the system via the FireWire
rol signals and power to the camera and the video
-
Exposure
-
Gain
-
Pan/Tilt
FireWire Bus Driver:
This component perform
OHCI FireWire Firmware. That is, it manages th
ager and bus
send and receive pack
OHCI FireWire Firmware:
T
card that enables the host co
host desktop computer already ha
necessary. Laptop computers requir
Refer to your PixeLINK Cam
PixeLINK Camera:
The camera is linked to the
cable. The cable carries cont
stream to the host computer.
PL-A630 to PL-A660 Series Cameras
PixeLINK
Megapixel FireWire Camera
System Guide
Copyright © 2000–2004 PixeLINK
All Rights Reserved
