A
PPENDIX
A. G
LOSSARY
P
AGE
17
Fi
1. Ensure that the FireWire cable is disconnected from the camer
other C-mount attachment.
2. Remove the screws holding the IR filter clamp in place (see Figure 2.14, below).
F
the cloth.
5. Replace the IR filter clamp and screws.
6. Reattach the len
t the FireWire cable.
Minor Clea
1. Carefull
ry, compr
nter of the
glass.
2. Remove
moistened
l alcohol. The swab
should be damp but not dripping.
Do not
gure 2.13
Camera C-Mount (PL-A650 and PL-A660 Series shown)
To remove the IR filter:
a. Remove the lens or
igure 2.14
Camera C-Mount, Exploded View (PL-A650 and PL-A660 Series shown)
3. Using a pair of fine-point tweezers, carefully lift out the IR Filter Clamp.
4. Place a lint-free cloth over the C-mount. Slowly tip the camera until the IR filter lands
gently in
s or other C-mount attachment and reconnec
ning of the IR Filter
y apply puffs of d
essed air to move particles off the ce
oils with a swab
with reagent-grade isopropy
use acetone to clean the IR filter
.
PixeLINK
PL-A630 to PL-A660 Series Cameras
Megapixel FireWire Camera
System Guide
Copyright © 2000–2004 PixeLINK
All Rights Reserved
