A
PPENDIX
A. G
LOSSARY
P
AGE
9
PixeLINK
PL-A630 to PL-A660 Series Cameras
A
PPENDIX
A. G
LOSSARY
P
AGE
9
PixeLINK
PL-A630 to PL-A660 Series Cameras
Megapixel FireWire Camera
System Guide
Copyright © 2000–2004 PixeLINK
All Rights Reserved
Megapixel FireWire Camera
System Guide
Copyright © 2000–2004 PixeLINK
All Rights Reserved
Figure 2.5
Camera, Bottom View (Showing Mount Holes)
2.3
PL-A630 and PL-A650 Series Imaging Module Hardware
2.3.1
Imaging Module Assembly
As shown in Figure 2.6 (on page 10), each PixeLINK imaging module consists of two
boards: an Imaging Assembly (the top board) and a FireWire Interface Board (the
bottom board, also shown in Figure 2.7 (on page 10). Note that an imaging module
might not be exactly as shown, depending on the model.
The camera is fitted with a 1" × 32 tpi standard C-mount lens adapter and equipped with
an Enhanced Control header (shown in Figure 2.9, on page 12). Mounting hardware may
be attached to the FireWire Interface Board at bottoms of the four spacing posts. A
mount suitable for attachment to a tripod is included in each PixeLINK Developer's Kit.
