Piusi HC20121400, Use And Maintenance Manual

Page: 11 / 36

- 11 -
IMPORTANT : The hose reel has to be wall mounted at a minimum height of the floor
of 2,50 m in order to prevent accidents during work operations.
Before delivery, each hose reel is packed with care. Please, check the packaging at the
reception of the goods and store only at a dry place.
PRELIMINARY VERIFICATIONS:
- Make sure you receive all the components. Ask the manufacturer for any possible missing
component.
- Verify that the device hasn’t been damaged during transport or storage operations.
- Accurately Clean suction and recovery openings, removing dust and rest of packing.
- Make sure that the hose reel is free to turn.
- Make sure to install it in a well lighted place.
- It is suggested to use a suction filter
In particular cases it is possible to mount it on the floor or on other machines as accessory,
only if complete with a fixed support.
Mount the hose reel already complete with hose on stiff and consistent walls, using 4 dowels
of 10 mm diameter.
WARNING! The manufacturer declines any responsibility for injuries to people or da-
mages to things caused by a wrong assembly of the hose reel.
7 - INSTALLATION
8 - MAINTENANCE
IMPORTANT: Maintenance should only be carried out by suitably trained
staff, who are familiar with the instructions and information in this ma-
nual.
Periodically check the reel for the leaks and smooth operation. Check that there is no fluid
leakage from the fittings and that the swivel joint and fittings are tight. Periodically lubricate
the hose for easy rewinding. If necessary, lubricate the joint.
Make sure that there is no tension in the spring before starting any operations inside
the hose reel. Always close the feeding of fluid to the machine before performing any
maintenance or servicing.
Replace the flexible hose if it shows any signs of wear or damage. Replace the seal inside
the revolving joint if it is worn or damaged. The replacement of the spring must only be
carried out by trained staff, according to the instructions supplied by the manufacture. Any
replacement of hose reel parts has to be done using original spare parts.
We advise you to contact the manufacturer for any possible anomaly and before replacing
any part. After every maintenance operation, put again the eventual supports.
EN