Page 3
For technical questions, please call 1-800-444-3353.
Item 69926
d.
Maintain the compressor. Keep the
compressor clean for better and safer
performance. Follow instructions for
lubricating and changing accessories.
Keep dry, clean and free from oil and grease.
Check for misalignment or binding of moving
parts, breakage of parts and any other
condition that may affect the compressor’s
operation. If damaged, have the compressor
repaired before use.
Many accidents are
caused by a poorly maintained compressor.
e.
Use the compressor in accordance with
these instructions, taking into account
the working conditions and the work to
be performed.
Use of the compressor for
operations different from those intended
could result in a hazardous situation.
5.
Service
a.
Have your compressor serviced by a
qualified repair person using only identical
replacement parts.
This will ensure that the
safety of the compressor is maintained.
Air Compressor Safety Warnings
1.
Risk of fire or explosion - do not spray flammable
liquid in a confined area or towards a hot surface.
Spray area must be well-ventilated. Do not
smoke while spraying or spray where spark or
flame is present. Arcing parts - keep compressor
at least 20 feet away from explosive vapors,
such as when spraying with a spray gun.
2.
Risk of bursting - do not adjust regulator higher
than marked maximum pressure of attachment.
3.
Risk of injury - do not direct air
stream at people or animals.
4.
Do not use to supply breathing air.
5.
Do not leave compressor unattended
for an extended period while plugged in.
Unplug compressor after working.
6.
Keep compressor well-ventilated.
Do not cover compressor during use.
7. Start and run the vehicle engine
during inflation period.
8. Do not remove the valve cover or
adjust internal components.
9. Compressor head gets hot during operation.
Do not touch it or allow children nearby during
or immediately following operation.
10. Do not use the air hose to move the compressor.
11. The use of accessories or attachments not
recommended by the manufacturer may
result in a risk of injury to persons.
12. All air line components, including hoses, pipe,
connectors, filters, etc., must be rated for a minimum
working pressure of 150 PSI, or 150% of the
maximum system pressure, whichever is greater.
13. Maintain labels and nameplates on the
compressor. These carry important safety
information. If unreadable or missing, contact
Harbor Freight Tools for a replacement.
14. This product is not a toy.
Keep it out of reach of children.
15. Operate unit on level surface.
16. People with pacemakers should consult their
physician(s) before use. Electromagnetic fields in
close proximity to heart pacemaker could cause
pacemaker interference or pacemaker failure.
17. WARNING: The brass components of
this product contain lead, a chemical
known to the State of California to cause
birth defects (or other reproductive harm).
(California Health & Safety code § 25249.5,
et seq.
)
18.
This Compressor will automatically shut
off on overload or under excessive heat.
Should this occur, turn the Power Switch to
its “OFF” position. Wait until the Compressor
cools. Then, turn the Power Switch to
its “ON” position to resume work.
SAVE THESE INSTRUCTIONS.
Summary of Contents for 69926
Page 1: ......
