Page 4
For technical questions, please call 1-800-444-3353.
Item 69926
Specifications
Electrical Rating
12 VDC
Maximum Air Pressure 100 PSI
Air Flow Capacity
0.88 CFM
Components and Controls
Figure A
Air Hose
Nozzles
Pressure Gauge
Air Nozzle Grip
Cigarette Lighter
Adapter
Fuse
(Inside
Adapter)
Operating Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
General Operation
1. Turn the On/Off Switch to the “OFF” position.
2. Connect the Air Hose to the Compressor.
3. Select the desired Nozzle accessory and
attach it to the end of the Air Nozzle.
4. Turn on the car engine.
a. Plug the Cigarette Lighter Adapter into
the vehicle’s cigarette lighter socket.
5. Turn the Compressor On/Off
Switch to the “ON” position.
Note:
Turn the Compressor on before connecting
to the tire valve to prevent blowing the fuse.
6. Be sure the valve stem is clean and free of dirt.
Holding the Air Nozzle Grip, connect the Nozzle
to the valve stem of the item to be inflated.
7. Monitor the Pressure Gauge carefully
to avoid over-inflating the item.
8. Continue inflating until the recommended
pressure is reached.
9. Turn the compressor On/Off Switch
to the “OFF” position.
10. Remove the Nozzle from the object.
11. Verify tire pressure with a tire pressure
gauge (not included), then replace the
valve cap where applicable.
12. If the pressure is low, repeat the
steps beginning with Step 5.
CAUTION!
Do not inflate the item beyond
the manufacturer’s inflation rating.
13. When finished, turn off the car engine and
unplug the Cigarette Lighter Adapter.
CAUTION!
The metal parts of the compressor and
hoses will become hot during use. Do not touch them.
14. Allow the Compressor to cool, then wipe
down and replace into the included storage
bag. Return the Nozzles to the small storage
bag attached to the Compressor Hose.
15. Store in a dry location.
Summary of Contents for 69926
Page 1: ......
