Page 4
For technical questions, please call 1-888-866-5797.
Item 63609
Bolt Removal
1. Attach the Cone Rod (6) to the end
of the Screw Adapter (7), then attach
this piece directly to the Slide Screw.
2. The Cone Rod works like an easy-
out bolt remover. Center the point
of the Cone Rod in the middle
of the bolt to be removed.
3. FORCEFULLY push the Slide Hammer
into the bolt to be removed.
4. Turn the Slide Screw
COUNTERCLOCKWISE as you
pull out the bolt. Continue to twist
and pull COUNTERCLOCKWISE
until bolt is removed.
Hook Pulling
1. Attach the Puller Hook (11)
or the Square Hook (5) to the
end of the Slide Screw.
2. Identify the lip area or edge of
the object you will be inserting
the chosen Hook into or onto.
3. Place the Hook into/onto the edge
or lip of the object to be pulled.
4. Push the Slide Hammer toward the
object to be pulled. Pull the Slide
Hammer toward the handle end.
5. Repeat Step Four until the
object has been pulled out.
Brought to You by www.snapwhole.com
Brought to You by www.snapwhole.com
