background image

SunZoon Light User Guide 59022 V0513

Cautionary and Warning Statements

•  This kit is designed and intended for educational purposes 

only. 

•  Use only under the direct supervision of an adult who has read 

and understood the instructions provided in this user guide.

•  Read warnings on packaging and in manual carefully.

•  Always exercise caution when using sharp tools. 

About the SunZoon Lite

The SunZoon Lite can be easily assembled without alterations, or 

the chassis can be shaped and painted for a unique look and to 

offer an opportunity to use tools such as a band saw. 

Or try experimenting with different gear combinations and 

wheels. The SunZoon Lite is as basic – or unique – as the builder 

wants it to be.

Materials Included

•   Basswood chassis board 

•   2 steel axles

•   Gear font 

•   Motor

•   2 large, rear wheels 

•   Solar panel

•   2 small, front wheels 

•   Adhesive tabs, double-sided

•   4 screw eyes 

•   Plastic tubing

Items Needed (not included)

•   Ruler 

•   Scissors

•   Hobby knife 

•   Band saw or sandpaper (optional)

•   Paint or other wood finish (optional)

Summary of Contents for SunZoon Lite









Reviews: