Pitney Bowes Epic v3.1, Operator'S Manual

Page: 117 / 336

Adjusting the Friction Feeder Separator
Each friction feeder has a separator that separates the material during the feed cycle. The separators
can be adjusted to accommodate various insert thickness. The adjustment outlined here gets the setup
very close to the final setting, but you may have to continue making adjustments at the start of the job.
Note:
The belts shown in these photos are blue, but feeder belts can also be red, tan or black depending on the system
configuration and the material being processed.
1. Loosen the feeder side guide locking knobs.
2. Turn the side guide adjustment knob clockwise until it stops (side guides all the way open) .
Item Description
1 Locking Knobs
2 Side Guide Adjustment Knob
3 Separator Knob
Feeder Side Guide Control Knobs
Operator Adjustments
Pitney Bowes Epic v3.1 (ZVE0) Operator Guide May, 2018 Page 110 of 328