Pitney Bowes DI900, Operator'S Manual, Page: 65 / 196

SV61311 Rev. E
3-23
Basic Operation • 3
Running a
Trial Piece
(continued)
• Use the UP/DOWN keys to re-position the address, and then se-
lect "Finished". You will be returned to the Home screen.
c. If you want to make other adjustments, select “Edit Job”. You will
now be able to add, delete, or move mail piece components and to
change parameters for a document(s) in the mail piece.
NOTES:
• Detailed instructions on use of the Add, Delete, Move, and Edit func-
tions are contained in later sections of this chapter.
• If you make any changes to the mail piece order, address position
and/or to a document(s) in the mail piece, run Trial Piece again to
verify machine function and mail piece accuracy.
• Any edits you make are NOT saved unless a Supervisor/Manager
specifically saves them.
d. If you need to check/verify the job settings, access the Review Job
screen (select "Home", then select "Menu", "Jobs" and finally "Re-
view Job").
5. Depending on your findings, choose one of the following options listed
on the Trial Piece screen:
a. If the trial mail piece passes inspection, select “Trial Piece OK”. You
will be returned to the Home screen, or press START to begin the
job.
b. If the address needs to be moved UP/DOWN (applies to Windowed
envelopes), select “Adjust Address”. The following screen will ap-
pear.
Adjust Address Screen
Press to adjust.
3 mm
A
B
C
ABC Company
36 Waterview Dr.
Derby, CT 12345
Accept