manualshive.com logo in svg

Pitney Bowes DI900, Operator'S Manual, Page: 47 / 196

Share
Download
Pitney Bowes DI900 Operator'S Manual Download Page 47

SV61311 Rev. E  

3-5

Basic Operation • 3 

2.  The Job Type screen provides access to all the jobs that are in your sys-

tem. This screen displays three categories to search for the job that you 

want to run:

•  "Saved Jobs" displays the list of jobs that you created and saved. 
•  "Recently Run Jobs" displays a list of the last 8 jobs that your system 

ran. This list shows each job's name and the date/time that the job 

ran. 

•  "Library Jobs" displays the names of the pre-defined jobs that came 

loaded on your system.

 

Select the desired category to display the list of jobs that are available in 

that category.

3  Select the desired job from the list.

•  If the job does not appear on the first page, use the UP/DOWN arrow 

keys to scroll through the list. 

•  As any job is highlighted in the list, the Mail Piece Icon Tree for the 

job appears on the display so that it can be identified

Selecting the 

Job

If the job that you want to run is the one that currently displays in the Home 

screen, proceed to the 

Runnng a Tral Pece

 section of this chapter. Other-

wise, follow the steps below to select the job:
1.  From the Home screen:

•  Select "Select Another Job" to view a list of saved jobs. Skip to step 

3, below. 

OR

 

•  Select "Menu", then "Jobs", and finally "Select Job". The Select Job 

Type screen displays.

Select Job Type Screen

Select Job Type

Saved Jobs

Recently Run Jobs

Library Jobs

Summary of Contents for DI900





































































































































































































Reviews:

No comments