manualshive.com logo in svg

Pitney Bowes DI900, Operator'S Manual, Page: 28 / 196

Share
Download
Pitney Bowes DI900 Operator'S Manual Download Page 28

2-10

SV61311 Rev. E  

2 • Meet the Inserting System

The 

Control Panel consists of the following components:

•  Screen Option Keys

 allow you to define settings for up to 24 jobs that 

you can store in the system’s memory. These keys also provide the 

means to edit any of the stored jobs.

• 

Fixed Function Keys

 allow you to access the system’s built-in tools that 

appear on the screen (such as the system’s help file). 

• 

Screen Navigation Keys

 allow you to move UP/DOWN and right/left in 

the Display and to apply selections that you’ve made.

•  Machine Action Keys 

control hardware components and mechanical 

movements.

• 

LED Status Indicator

About the 

Control Panel

The Screen Option Keys are the eight keys on the right side of the screen. 

These keys correspond to options on the screen, and therefore have no 

dedicated labels. Use these keys to highlight an item in a displayed pick list 

and/or to select the associated menu, item, action, or option.

Screen Option 

Keys

OK

Reset 

Counter

Help

Cancel

Home

Start

Trial 

Piece

Clear 

Deck

Stop

Control Panel

Screen Navigation Keys

Machine Action Keys

Screen Option Keys

LED Status Indicator

Fixed Function Keys

Summary of Contents for DI900





































































































































































































Reviews:

No comments