manualshive.com logo in svg

Pitney Bowes ADDRESSRIGHT DA900, Operating Manual

Share
Download
Pitney Bowes ADDRESSRIGHT DA900 Operating Manual Download Page 62

7

  

Maintenance

7-4

SV60970-OG Rev. A

When replacing empty cartridge with new cartridge:

1. When the ink in the cartridge reaches a low level, the

printer will stop feeding and the following message will
be displayed:
Printer Offline

nnn

Head  n  Low:

Press ENTER

NOTE: "nnn" is the number of the head with a low ink
supply.

2. Press Enter and the following will be displayed:

Printer Offline

nnn

ENTER  when  head  is  filled

3. Replace the cartridge and press Enter again. The display

will change to the following:
Printer Offline

nnn

Head  n  has  a  new  cartridge

IMPORTANT:

 You should replace a cartridge when the

printer indicates the ink has run out. If you don't, or reset
the ink left setting to circumvent the low ink warning, the
cartridge will run out of ink very soon after and prevent
you from printing

.

Store the inkjet cartridges in the docking station (photo, next
page) or in an area that is free of dust and paper particles. Do
not keep them in an area that is too dry for a long period of
time. Discard used cartridges in the normal manner.

Setting "Ink Left"
Feature When
Replacing
Cartridges
(continued)

6. To check that you have identified ("filled") all of the

cartridges, press and hold the Test Print key until the
Service Menu appears. Then use the – key to display the
following message:

Service Menu:

     Ink Levels

100% 100% 100% 100% 100% 100%

NOTE:

 Step 6 can also be used to check the level of the ink

in the cartridges at any time during operation of the printer.

Summary of Contents for ADDRESSRIGHT DA900













































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands