Pitney Bowes ADDRESSRIGHT DA900 Page 23 Operating Manual Download

Page: 23 / 108

DA900 AddressRight™ Printer

3-5

SV60970-OG Rev. A

3 - Meet the DA900

PRINTER OFFLINE

- Printer is waiting for data and the

main drive motor is off. This message appears when you
turn the power on.

PRINTER ONLINE

- The main drive motor is on and

waiting for the feeder to be turned on.

PRINTING

- Both main drive and feeder are on. Printer is

feeding media and printing. If no media is in the hopper,
the printer shuts down after one half second.

SETUP MENU

-The printer is in Setup Mode.

SERVICE MENU

- The printer is in Service Mode.

TEST PRINTING

- The printer is in Test Mode. Press

ENTER to print a test sheet.

ENTER TO FEED

- Press the ENTER key to engage the

feeder.

ENTER TO STOP FEED

- Press the ENTER key to

disengage the feeder.

OUT OF PAPER

- The paper sensor does not detect

media within one half second of starting the feeder.

OPERATOR STOP

- The operator caused the printer to

stop printing.

REMOTE STOP

- The software stopped the printer from

printing.

PAPER JAM

- Paper jam detected.

Setup Menu Functions

To place the printer in Setup Mode, hold the MENU key
for two seconds. Use the + and - keys to move through
the functions.

TOTAL COUNT

- Displays the total pieces fed.

PR W990

- Displays the current version of BIOS software

DA900 Printer
Control Panel
Messages

Summary of Contents for ADDRESSRIGHT DA900













































































































Search results

Summary of Contents for ADDRESSRIGHT DA900

Reviews:

Related manuals for ADDRESSRIGHT DA900

Brands by name

Popular brands

Pitney Bowes ADDRESSRIGHT DA900, Operating Manual

Search results

Summary of Contents for ADDRESSRIGHT DA900

Reviews:

Related manuals for ADDRESSRIGHT DA900

Brands by name

Popular brands