Pitco Solstice SE Series, Service Manual, Page: 25 / 72

Pitco Solstice Electric Fryers
SE Series Service Manual 25
Replacing the DVI Switch
1. Remove the two (2) screws, which hold the
proximity sensor on the drain handle, using a
flathead screwdriver.
2. Loosen the two (2) screws, which hold the
actuator, using a Philips screwdriver.
3. Unfasten the switch harness from the wire
channel.
4. Remove the switch from mounting plate using a
narrow tip flathead screwdriver.
5. Replace the DVI switch ensuring a 1/4 inch gap
between the actuator and the magnet.
6. Follow steps 1 through 3 in reverse to install a
new DVI.