Spin Fryer I12 Cooking Computer
Pitco P/N 60149505
Page 17 of 28
L22-355 Rev 1
4.8.2
Heat Demand Profile
With display showing
, press product key
3
. Display will show
[xxxxxxx] [HEAT DEM], where xxxxxxx may be one of 6 heat control profiles listed below.
1. [GENERIC 1] for gas fired fryer appliance.
This is the factory default
.
2. [GENERIC 2] for electric fryer appliances, and model SGH50.
3. [TEST] for use in special cook testing, do not select this setting for normal operations.
Use product key [0] change value, then press the
to save choice Display returns to
.
4.8.3
Shake Alarm Duration
With display showing
, press product key
4
. Display will show
[SH-DUR:nn] [DURATION], where “nn” is the time in seconds the shake alarm will sound. Use
product keys for numeric entry of desired value, then press the
to save choice. Display
returns to
.
4.8.4 Hold
Alarm
Duration
With the display showing
, press product key
5
. Display will
show [HD-DUR:nn] [DURATION], where “nn” is the time in seconds the hold alarm will sound.
Use product keys for numeric entry of desired value, then press the
to save choice.
Display returns to
.
4.8.5 Cancel
Duration
With the display showing
, press product key
6
. Display will
show [CANCEL:nn] [DELAY] , where “nn” is the time in seconds the operators must press a
product key to cancel a cook. Use product keys for numeric entry of desired value, then press
the
to save choice. Display returns to
. Default value is
2 seconds.
4.8.6 Configuration
Value
With display showing
, press product key
7
. Display will show
[CFG hhhh], where “hhhh” is a hexadecimal checksum of the configuration memory contained
in the controller. Modifications to any part of the setup of this control will change the check
sum value. Press the
display will return to
.
6
7
3
4
5
