Pit Boss Mile Hybrid, Assembly & Operation

Page: 21 / 42

21
WOOD PELLET GRILLING
UNDERSTANDING THE CONTROL BOARD
CONTROL DESCRIPTION
Press the Power Button to power on the unit. The button will glow blue if connected to a power source.
Press and hold the button for two seconds to turn the unit off.
The Controller Knob is used to select a cooking mode. Rotate the Controller Knob to set the grill in 5 different
modes available:
• GAS - This mode is selected when only the gas components of the grill are in use. This mode will deactivate
all wood pellet components from starting or running, but the actual cook temperature (ACTUAL) will still
be displayed.
• COMBO - This mode is selected when both the gas and wood pellet components are in use.
• PELLET - This mode is selected when only the wood pellet components are in use. All gas valves must be
off/closed in this mode. Choose from the three temperature presets: LO (107°C / 225°F), MED (135°C /
275°F), or HIGH (176°C / 350°F). When a pellet cooking mode is selected, the COOK mode will change on
the LCD screen.
The "P" Set Button is used to select one of the eight fine tunings when the Controller Knob is set to the
SMOKE Setting. Press the button to change the "P" setting to accommodate to your cooking style and
cooking environment, as preferred. With a short push of the button, the setting increases from P0 to P7,
then repeats. Adjustments are only possible in the SMOKE Setting. Factory default setting is "P4". If the "P"
setting is adjusted, your preference will be locked-in (saved) until further adjustment is made.
The
"P" Set Button is also used as a Temperature Switch Control to change the temperature readout on
the LCD Screen. Press and hold the button for two seconds to switch to Celsius (ºC) or to Fahrenheit (ºF), as
preferred. Default is set to Fahrenheit.
The LCD Screen is used as the information center for your unit. The LCD screen will display your "P" setting,
actual cook temperature (ACTUAL), and the Meat Probe temperatures (PROBE1, PROBE2). If only one Meat
Probe is connected, only one reading will be displayed.
PRIME
“P” SET
PROBE 1
ACTUAL
FC
COOK “P” SET
FC
PROBE 2
FC
Press and hold the Prime Button to activate an extra feed of pellets to the Burn Pot. This can be used to
add more fuel to the fire before opening the barrel lid, resulting in a quick heat recovery time. It can also be
used while smoking, to increase the intensity of clean smoke flavor. Requested from competition cookers.
The plug-in connection port(s) on the front of the Control Board are for a Meat Probe(s) . When a Meat Probe
is connected, the temperature is displayed on the LCD Screen. When not in use, disconnect the Meat Probe
from the connection port. Compatible with Pit Boss® branded Meat Probes only. Additional Meat Probe(s)
sold separately.