ESP
AÑOL
69
10. COLOCACIÓN DEL INDICADOR DE CALOR
Partes requeridas:
1 x Indicador de calor (#5)
1 x Puerta del gabinete (#9)
Instalación:
• Retire la arandela y la tuerca mariposa del indicador de calor.
• Inserte la placa del indicador de calor en el orificio de montaje en la
parte delantera de la puerta del armario, coloque la arandela en el
tornillo en el interior de la puerta y apriete a mano para asegurarla.
NOTA: La indicador de calor se suministra con una arandela y una
tuerca de mariposa.
11. MONTAJE DE LA MANIJA Y PESTILLOS DE LA
PUERTA DEL GABINETE
Partes requeridas:
1 x Junta de la manija de la puerta del gabinete (#6)
1 x Manija de puerta del gabinete (#7)
1 x Pestillo para puerta del gabinete (#8)
4 x Tornillo (#C)
Instalación:
• Primero, vuelva a montar la puerta del gabinete en el gabinete principal
alineando y asegurando ambas bisagras. Asegúrese de que la puerta
esté montada correctamente probando que se abra libremente.
• Monte la manija de la puerta del gabinete en el lado frontal de la
puerta del gabinete con dos Tornillos. Note la dirección correcta en 11A.
• Monte el pestillo de la puerta del gabinete en el lado exterior del
gabinete principal usando dos Tornillos. Nota 11B.
12. INSTALACIÓN DEL SOPORTE DEL RETÉN DE LA BOMBONA
Partes requeridas:
1 x Soporte del retén de la bombona (#18)
4 x Tornillo (#B)
Instalación:
• Monte el soporte de retención del cilindro de gas en el gabinete
principal usando cuatro Tornillos como se muestra en la ilustración.
1
BRACKET INTO THE LOWER SMOKER
CABINET ASSEMBLY
Parts Required:
1 x Lower Smoker Cabinet Assembly (#14)
Installation:
(#17) to the Lower Smoker Cabinet
Fig.15
5.2 shown.
1 .
ASSEMBLY INTO THE LOWER
SMOKER CABINET ASSEMBLY
Parts Required:
1 x Wood Chip Box Lid (#11)
1 x Wood Chip Box Assembly (#12)
1 x Lower Smoker Cabinet Assembly (#14)
Installation:
•Put the Wood Chip Box Lid (#11) on
the Wood Chip Box Assembly (#12)
and slide Wood Chip Box onto the
Wood Chip Box support rails of Lower
Smoker Cabinet Assembly (#14) as
Fig.16 shown.
1
BRACKET INTO THE LOWER SMOKER
CABINET ASSEMBLY
Parts Required:
1 x Lower Smoker Cabinet Assembly (#14)
Installation:
(#17) to the Lower Smoker Cabinet
Fig.15
5.2 shown.
1 .
ASSEMBLY INTO THE LOWER
SMOKER CABINET ASSEMBLY
Parts Required:
1 x Wood Chip Box Lid (#11)
1 x Wood Chip Box Assembly (#12)
1 x Lower Smoker Cabinet Assembly (#14)
Installation:
•Put the Wood Chip Box Lid (#11) on
the Wood Chip Box Assembly (#12)
and slide Wood Chip Box onto the
Wood Chip Box support rails of Lower
Smoker Cabinet Assembly (#14) as
Fig.16 shown.
10
1 .
MOUNTING DOOR LATCH ASSEMBLY
TO THE UPPER SMOKER CABINET
ASSEMBLY
Parts Required:
2 x #10-24*1/2”(#C)
Installation:
(#2) using 2 x #10-24*1/2”(#C) as
Fig.1 shown.
12. INSERTING HEAT INDICATOR INTO
THE DOOR ASSEMBLY
Parts Required:
1 x Door Assembly (#10)
1 X Heat
Installation:
•
the mounting hole in
by hand as Fig.12 shown.
1 .
MOUNTING DOOR HANDLE TO THE
DOOR ASSEMBLY
Parts Required:
1 x Door Handle (#7)
1 x Silicon Washer (#8)
1 X Door Assembly (#10)
2 x #10-24*1/2”(#C)
Installation:
• Attach the Door Handle (#7) with Silicon
Washer (#8) to the Door Assembly (#10)
using 2 x #10-24*1/2”(#C) as Fig.14
shown.
11A
11B
12
5
9
1 .
MOUNTING DOOR LATCH ASSEMBLY
TO THE UPPER SMOKER CABINET
ASSEMBLY
Parts Required:
2 x #10-24*1/2”(#C)
Installation:
(#2) using 2 x #10-24*1/2”(#C) as
Fig.1 shown.
12. INSERTING HEAT INDICATOR INTO
THE DOOR ASSEMBLY
Parts Required:
1 x Door Assembly (#10)
1 X Heat
Installation:
•
the mounting hole in
by hand as Fig.12 shown.
1 .
MOUNTING DOOR HANDLE TO THE
DOOR ASSEMBLY
Parts Required:
1 x Door Handle (#7)
1 x Silicon Washer (#8)
1 X Door Assembly (#10)
2 x #10-24*1/2”(#C)
Installation:
• Attach the Door Handle (#7) with Silicon
Washer (#8) to the Door Assembly (#10)
using 2 x #10-24*1/2”(#C) as Fig.14
shown.
1 .
MOUNTING DOOR LATCH ASSEMBLY
TO THE UPPER SMOKER CABINET
ASSEMBLY
Parts Required:
2 x #10-24*1/2”(#C)
Installation:
(#2) using 2 x #10-24*1/2”(#C) as
Fig.1 shown.
12. INSERTING HEAT INDICATOR INTO
THE DOOR ASSEMBLY
Parts Required:
1 x Door Assembly (#10)
1 X Heat
Installation:
•
the mounting hole in
by hand as Fig.12 shown.
1 .
MOUNTING DOOR HANDLE TO THE
DOOR ASSEMBLY
Parts Required:
1 x Door Handle (#7)
1 x Silicon Washer (#8)
1 X Door Assembly (#10)
2 x #10-24*1/2”(#C)
Installation:
• Attach the Door Handle (#7) with Silicon
Washer (#8) to the Door Assembly (#10)
using 2 x #10-24*1/2”(#C) as Fig.14
shown.
1 .
MOUNTING DOOR LATCH ASSEMBLY
TO THE UPPER SMOKER CABINET
ASSEMBLY
Parts Required:
2 x #10-24*1/2”(#C)
Installation:
(#2) using 2 x #10-24*1/2”(#C) as
Fig.1 shown.
12. INSERTING HEAT INDICATOR INTO
THE DOOR ASSEMBLY
Parts Required:
1 x Door Assembly (#10)
1 X Heat
Installation:
•
the mounting hole in
by hand as Fig.12 shown.
1 .
MOUNTING DOOR HANDLE TO THE
DOOR ASSEMBLY
Parts Required:
1 x Door Handle (#7)
1 x Silicon Washer (#8)
1 X Door Assembly (#10)
2 x #10-24*1/2”(#C)
Installation:
• Attach the Door Handle (#7) with Silicon
Washer (#8) to the Door Assembly (#10)
using 2 x #10-24*1/2”(#C) as Fig.14
shown.
8
6 7
C
C
C
18
B
Summary of Contents for 10719
Page 59: ......
