ENGLISH
10
8. ASSEMBLING THE MAIN CABINET TO THE CABINET BASE
Parts Required:
6 x Screw (#C)
Installation:
• Prepare the Main Cabinet to be mounted to the Cabinet Base. Position
the Cabinet Base next to the Main Cabinet, with both facing the same
direction. Carefully, lift the Main Cabinet onto the Cabinet Base. Secure
the Main Cabinet to the Cabinet Base using six screws.
9. INSTALLING THE COOKING COMPONENTS
Parts Required:
8 x Cooking
Grid Support Brackets (#2)
4 x Cooking Grids (#1)
1 x Water Pan (#16)
1 x Water Pan Support (#17)
Installation:
• Insert the Water Pan Support into the bottom of the main interior
cabinet, then sit the Water Pan in the support. Note 9A.
NOTE: Keep water in the Water Pan at all times while cooking. It will
catch grease and drippings from your cooks and allow for easier
clean up. If smoking for an extended period, move Water Pan up
higher to allow water to last longer.
• Next, insert eight Cooking Grid Support Brackets into the holes along
the inside left wall of the Main Cabinet. Once positioned in the holes,
tilt downward to secure into position. Repeat the same process,
matching the same heights, for the right-side wall. Note 9B.
• Lastly, place the Cooking Grids on the Cooking Grid Support Brackets
inside the Main Cabinet. Note 9C.
CAUTION: To change the height between each Cooking Grid, adjust
only when the smoker is completely cooled to avoid injury.
10
.
ASSEMBLING COOKING GRID
SUPPORT TO THE UPPER SMOKER
CABINET ASSEMBLY
Parts Required:
Installation:
10. PLACING WATER PAN AND WATER
PAN SUPPORT ONTO THE BOTTOM
AREA OF CABINET AND PLACING
COOKING GRIDS INTO THE
COOKING GRID SUPPORT
Parts Required:
x Cooking Grid (#4)
1 X Water pan Support (#16)
1 x Water Pan (#15)
Installation:
•Place Water Pan Support (#16) and
Water Pan (#15) onto the bottom area of
Cabinet and place
Cooking Grids
(#4) into the Cooking Grid Support as
Fig.10.1 & Fig.10.2 shown.
1 .
ATTACHING DOOR ASSEMBLY INTO
THE UPPER SMOKER CABINET
ASSEMBLY
Parts Required:
Installation:
1
10
.
ASSEMBLING COOKING GRID
SUPPORT TO THE UPPER SMOKER
CABINET ASSEMBLY
Parts Required:
Installation:
10. PLACING WATER PAN AND WATER
PAN SUPPORT ONTO THE BOTTOM
AREA OF CABINET AND PLACING
COOKING GRIDS INTO THE
COOKING GRID SUPPORT
Parts Required:
x Cooking Grid (#4)
1 X Water pan Support (#16)
1 x Water Pan (#15)
Installation:
•Place Water Pan Support (#16) and
Water Pan (#15) onto the bottom area of
Cabinet and place
Cooking Grids
(#4) into the Cooking Grid Support as
Fig.10.1 & Fig.10.2 shown.
1 .
ATTACHING DOOR ASSEMBLY INTO
THE UPPER SMOKER CABINET
ASSEMBLY
Parts Required:
Installation:
1
9B
9A
9C
16
17
2
1
1
1
1
10
.
ASSEMBLING COOKING GRID
SUPPORT TO THE UPPER SMOKER
CABINET ASSEMBLY
Parts Required:
Installation:
10. PLACING WATER PAN AND WATER
PAN SUPPORT ONTO THE BOTTOM
AREA OF CABINET AND PLACING
COOKING GRIDS INTO THE
COOKING GRID SUPPORT
Parts Required:
x Cooking Grid (#4)
1 X Water pan Support (#16)
1 x Water Pan (#15)
Installation:
•Place Water Pan Support (#16) and
Water Pan (#15) onto the bottom area of
Cabinet and place
Cooking Grids
(#4) into the Cooking Grid Support as
Fig.10.1 & Fig.10.2 shown.
1 .
ATTACHING DOOR ASSEMBLY INTO
THE UPPER SMOKER CABINET
ASSEMBLY
Parts Required:
Installation:
1
10
.
ASSEMBLING COOKING GRID
SUPPORT TO THE UPPER SMOKER
CABINET ASSEMBLY
Parts Required:
Installation:
10. PLACING WATER PAN AND WATER
PAN SUPPORT ONTO THE BOTTOM
AREA OF CABINET AND PLACING
COOKING GRIDS INTO THE
COOKING GRID SUPPORT
Parts Required:
x Cooking Grid (#4)
1 X Water pan Support (#16)
1 x Water Pan (#15)
Installation:
•Place Water Pan Support (#16) and
Water Pan (#15) onto the bottom area of
Cabinet and place
Cooking Grids
(#4) into the Cooking Grid Support as
Fig.10.1 & Fig.10.2 shown.
1 .
ATTACHING DOOR ASSEMBLY INTO
THE UPPER SMOKER CABINET
ASSEMBLY
Parts Required:
Installation:
1
10
.
ASSEMBLING COOKING GRID
SUPPORT TO THE UPPER SMOKER
CABINET ASSEMBLY
Parts Required:
Installation:
10. PLACING WATER PAN AND WATER
PAN SUPPORT ONTO THE BOTTOM
AREA OF CABINET AND PLACING
COOKING GRIDS INTO THE
COOKING GRID SUPPORT
Parts Required:
x Cooking Grid (#4)
1 X Water pan Support (#16)
1 x Water Pan (#15)
Installation:
•Place Water Pan Support (#16) and
Water Pan (#15) onto the bottom area of
Cabinet and place
Cooking Grids
(#4) into the Cooking Grid Support as
Fig.10.1 & Fig.10.2 shown.
1 .
ATTACHING DOOR ASSEMBLY INTO
THE UPPER SMOKER CABINET
ASSEMBLY
Parts Required:
Installation:
1
10
.
ASSEMBLING COOKING GRID
SUPPORT TO THE UPPER SMOKER
CABINET ASSEMBLY
Parts Required:
Installation:
10. PLACING WATER PAN AND WATER
PAN SUPPORT ONTO THE BOTTOM
AREA OF CABINET AND PLACING
COOKING GRIDS INTO THE
COOKING GRID SUPPORT
Parts Required:
x Cooking Grid (#4)
1 X Water pan Support (#16)
1 x Water Pan (#15)
Installation:
•Place Water Pan Support (#16) and
Water Pan (#15) onto the bottom area of
Cabinet and place
Cooking Grids
(#4) into the Cooking Grid Support as
Fig.10.1 & Fig.10.2 shown.
1 .
ATTACHING DOOR ASSEMBLY INTO
THE UPPER SMOKER CABINET
ASSEMBLY
Parts Required:
Installation:
1
2
8
.
SMOKER CABINET ASSEMBLY
Parts Required:
1 x Upper Smoker Cabinet Assembly (#2)
2 x #10-24*1/2”Screw (#C)
Installation:
•
the
Assembly (#10) and set
aside. Mount
(#1) to the
Upper Smoker Cabinet Assembly (#2)
using 2 x #10-24*1/2”Screws (#C), 2 x
2 x #10-24
Lock Nut
.
UPPER SMOKER CABINET ASSEMBLY
Parts Required:
1 x Upper Smoker Cabinet Assembly (#2)
Installation:
•
to the Upper
Smoker Cabinet Assembly (#2) using 4 x
.
UPPER SMOKER
CABINET ASSEMBLY TO THE
LOWER SMOKER CABINET
ASSEMBLY
Parts Required:
1 x Upper Smoker Cabinet Assembly (#2)
1 x Lower Smoker Cabinet Assembly (#14)
6 x #10-24*1/2”(#C)
Installation:
• Mount Upper Smoker Cabinet Assembly
(#2)to the Lower Smoker Cabinet Assembly
(#14) using 6 x #10-24*1/2”(#C) as Fig.8.1 &
Fig.8.2 shown.
.
SMOKER CABINET ASSEMBLY
Parts Required:
1 x Upper Smoker Cabinet Assembly (#2)
2 x #10-24*1/2”Screw (#C)
Installation:
•
the
Assembly (#10) and set
aside. Mount
(#1) to the
Upper Smoker Cabinet Assembly (#2)
using 2 x #10-24*1/2”Screws (#C), 2 x
2 x #10-24
Lock Nut
.
UPPER SMOKER CABINET ASSEMBLY
Parts Required:
1 x Upper Smoker Cabinet Assembly (#2)
Installation:
•
to the Upper
Smoker Cabinet Assembly (#2) using 4 x
.
UPPER SMOKER
CABINET ASSEMBLY TO THE
LOWER SMOKER CABINET
ASSEMBLY
Parts Required:
1 x Upper Smoker Cabinet Assembly (#2)
1 x Lower Smoker Cabinet Assembly (#14)
6 x #10-24*1/2”(#C)
Installation:
• Mount Upper Smoker Cabinet Assembly
(#2)to the Lower Smoker Cabinet Assembly
(#14) using 6 x #10-24*1/2”(#C) as Fig.8.1 &
Fig.8.2 shown.
Summary of Contents for 10719
Page 59: ......