ENGLISH
12
14. MOUNTING THE CONTROL KNOB
Parts Required:
1 x Control Knob (#19)
Installation:
• Mount the Control Knob to the front panel of the unit. Push the
Control knob firmly into the front panel until firmly seated.
IMPORTANT: Make certain to align the flat portion of the stem
with the flat portion of the Control Knob. This will ensure a proper
connection to the electrical components.
15. INSTALLING THE GREASE TRAY
Parts Required:
1 x Grease Tray (#14)
Installation:
• Slide the Grease Tray into the opening below the front control panel
of the unit. Ensure the grease tray sits properly on the rails.
16. LOOPING THE ZIP-TIE
Parts Required:
1 x Zip-tie (#F)
Installation:
• Loop the Zip-tie through the outside edge hole of the front-right
Support Leg and around the regulator tubing.
NOTE: When the smoker is not connected to a gas supply, this will
assist in keeping the regulator head off the ground.
• The unit is now completely assembled.
13. ASSEMBLING & INSTALLING THE WOOD CHIP TRAY
Parts Required:
1 x Wood Chip Tray Lid (#11)
1 x Wood Chip Tray Assembly (#12)
Installation:
• Insert the wood chip tray lid into the lid slots on the wood chip tray
assembly and flip the lid down so it closes. Note illustrations in 13A.
• Slide the assembled wood chip tray into the opening above the front
control panel of the unit. Note 13B.
1 .
PLACING CONTROL KNOB INTO THE
VALVE STEM
Parts Required:
Installation:
.
CONTROL PANEL
Parts Required:
19. LOOPING ZIP-TIE ONTO THE
RIGHT FRONT LEG
Parts Required:
19
19
1 .
PLACING CONTROL KNOB INTO THE
VALVE STEM
Parts Required:
Installation:
.
CONTROL PANEL
Parts Required:
19. LOOPING ZIP-TIE ONTO THE
RIGHT FRONT LEG
Parts Required:
19
19
15
16
14
F
1 .
PLACING CONTROL KNOB INTO THE
VALVE STEM
Parts Required:
Installation:
.
CONTROL PANEL
Parts Required:
19. LOOPING ZIP-TIE ONTO THE
RIGHT FRONT LEG
Parts Required:
19
19
14
19
1
BRACKET INTO THE LOWER SMOKER
CABINET ASSEMBLY
Parts Required:
1 x Lower Smoker Cabinet Assembly (#14)
Installation:
(#17) to the Lower Smoker Cabinet
Fig.15
5.2 shown.
1 .
ASSEMBLY INTO THE LOWER
SMOKER CABINET ASSEMBLY
Parts Required:
1 x Wood Chip Box Lid (#11)
1 x Wood Chip Box Assembly (#12)
1 x Lower Smoker Cabinet Assembly (#14)
Installation:
•Put the Wood Chip Box Lid (#11) on
the Wood Chip Box Assembly (#12)
and slide Wood Chip Box onto the
Wood Chip Box support rails of Lower
Smoker Cabinet Assembly (#14) as
Fig.16 shown.
13A
13B
12
11
12
Summary of Contents for 10719
Page 59: ......