ENGLISH
8
2. INSTALLING THE BOTTOM SHELF
Parts Required:
1 x Bottom Panel (#20)
2 x Wheel (#22)
4 x Screw (#A)
4 x Washer (#B)
4 x Locking Washer (#C)
2 x Nut (#D)
2 x Washer (#E)
Installation:
• From underneath, secure the bottom shelf to all each leg using a
screw, locking washer, and washer. Ensure the flat surface of the shelf
is facing up. Note illustration 2A.
• After fitting the wheels into the axle, lock them with washer and nut.
Note illustration 2B.
• Once the shelf is secure, carefully lift the grill into an upright position.
3. SECURING THE LID STOPPER
Parts Required:
1 x Lid Stopper (#2)
Installation:
• Secure the lid stopper onto the top of the main barrel using the pre-
installed screw on the top of the main barrel.
4. ASSEMBLING THE LID HANDLE
Parts Required:
1 x Lid Handle (#15)
2 x Lid Handle Bezel (#16)
Installation:
• Remove the pre-installed screws from the lid handle. From inside the
barrel lid, insert one screw to protrude to the outside. Add a bezel on
the screw, then hand-tighten the screw (from the inside) into the lid
handle. Repeat same installation for other end of lid handle.
4
16
16
15
22
2B
22
E D
E
D
3
2
2A
20
A
BC
