Energy saving sensor (DWE) Instruction manual
According to panel operation procedure ①
of selection mode for panel operation procedure,
input auto preset in the selection mode
P1/P2 setting range : same as pressure display
range
H1/H2 setting range : 0~90kPa equivalent
※1. Energy save type satisfies (P1≤P2,H1≤H2)
※2. 2 point SW output type satisfies
(P1≤P2)^(P1+2H≤P2)
when SW operation(C5~C8) is selected
※3. Press (▼) and (▲) simultaneously for 2 second
to Confirm / Save and return to operation mode
According to panel operation procedure ①
of selection mode for panel operation procedure,
input auto preset in the selection mode
Use (▼) or (▲) button to set Pressing button
will change value to PA cH br PS PA in
order. To set, press (▼) and (▲) simultaneously
for 1 second to fix and return to selection mode
※Press (▼) and (▲) simultaneously for 2 second
to Confirm / Save and return to operation mode
All LEDs light up
Display program number
Operation mode
Display product specification
[Display product specification]
The S1 LED blinks and the P1 setpoint of
the phenomenon is displayed. To set, press
(▼) and (▲) simultaneously for 1 second to
fix and move to next step
The S2 LED blinks and the H2 setpoint of
the phenomenon is displayed. To set, press
(▼) and (▲) simultaneously for 1 second to
fix and move to next step
The S1 LED blinks and the h1 setpoint of the
phenomenon is displayed. After setting with
(▼) and (▲) button, press button for 1 second
simultaneously to confirm move to next step
The S2 LED blinks and the P2 setpoint of the
phenomenon is displayed. After setting with
(▼) and (▲) button, press button for 1 second
simultaneously to confirm move to next step
44
