VJ check type structure
compressor
Built-in spring type check valve.
Dry unit
Check function
Check function
3 types for supply valv
Wide variety of combinations can cope with variousneeds.
External Vacuum Controller for Vacuum Pump Series is for
available
For the pipe lead-out direction of concentrated piping of
manifold-type, two types are available; front lead-out
typeand rear lead-out type.
It is designed to adjust the breaking flow and breaking pressure at the same time to prevent scattering or locking of work
piece which is difficult to control by only breaking flow adjustment.
By adding a relief function to the vacuum breaker circuit, the vacuum breakdown time has been shortened for the first
time in the industry.
The vacuum sensor is an LED-indicated digital sensor (V4).
The basic specification : 2 switch output and analog output
Standard nozzle bore: 05(ø0.5mm), 07(ø0.7mm), 10(ø10mm) and 12(ø1.2mm).
Doble solenoid type
(Vacuum retention type, selectable for saving energy)
Normally closed type
Normally open type
- Built-in
Spring type
check valve.
- Stable long time check.
- Vacuum ON / OFF can be performed in one operation when energy saving sensor is used.
Check function
Maintain vacuum
residual pressure
for at least 4 hours
keeping vacuum
compressor off
Vacuum genelrator VJ
keeping workpiece
adsorption
2
Vacuum PAD
work
Blow-off air rate adjustment needle
Blow-off pressure adjustment needle
Blow-off air flow control
Blow-off air
Blow-off pressure control
Vacuum Generator
※ Vacuum failure air means the
air blowing to release the vacuum.
Vacuum Pad
Tiny and light work-piece
Prevent blowing away work-piece
