Start the device and repeat the adsorption and exhaust
(regardless of the number of times)
Calculate P1 ~ H2 from left formula (return flag to "Hd")
Confirm set value, return to pressure display (operation mode)
Select auto setting mode and return to pressure display
(operation mode)
Press for more than 1 second to open, PA blinks
Energy saving sensor (DWE) Instruction manual
<Operation procedure (SW mode setting)>
This operation is not necessary due to
energy saving mode.
<Operation procedure
(Display unit switching)
>
This operation is not necessary due to
[Kpa] unit only.
<Operation procedure (Filter setting)>
or
or
or
Select setting item
If "Hd",
select setting item
"AP"
Blinks when set
Select setting item
Select setting item
(1s) : Confirm the setting and select the setting item
(2s) : Save settings and return to operation mode
(1s) : Confirm the setting and select the setting item
(2s) : Save settings and return to operation mode
(1s) : Confirm the setting and select the setting item
(2s) : Save settings and return to operation mode
<Operation procedure
(Energy saving setting)
>
or
ON : Energy saving mode ON
OF : Energy saving mode OFF
or
or
or
[Set value]
<Operation procedure (Set password)>
or
Password setting range
(1s) : Confirm the setting and select the setting item
(2s) : Save settings and return to operation mode
[Password]
00 : Does not ask for password
<Operation procedure
(Energy saving setting)
>
Hd : Manual setting mode
Au : Auto setting mode
A : Max. Reach Pressure,
B : Min. Reach Pressure
※ Pressure detection condition: -10 kPa or less
[Auto setting mode]
40