No Diving or Jumping. Observe all Safety Rules
Section
3
3-3
GENERAL INSTRUCTIONS - ROUND POOLS
ASSEMBLING THE POOL WALL
Section
3
4. Join the ends of the pool wall
a. Line up the holes in the two ends of the pool wall.
(Image 8)
b. Now that you have installed the wall you can be faced
with three scenarios.
1) The wall joints align perfectly, if so, move on to the
next step (c).
2) Your wall appears to be too short.
It is not.
However
the space between the bottom rails must be decreased
by lightly tapping the bottom plates towards the inside of
the pool. You can also tap the wall lightly with both hands
in the desired direction.
(Image 9)
You MUST recheck the gaps at each and every one of
the bottom rails so that they are all equal in gap size.
3) Your wall appears too long.
It is not.
However the
space between the bottom rails must be increased by
tapping the bottom plates lightly towards the outside of
the pool or by tapping the wall with both hands in the
desired direction.
(Image 10)
You MUST recheck the gaps at each and every one of
the bottom rails so that they are all equal in gap size.
c. Recheck the position of the upright, refer to your pool’s
footprint diagram.
A. CONT. SETTING UP THE POOL WALL
Important Note:
Bottom rails must always be held in place in the bottom plate.
Important Note:
You MUST recheck the gaps at each and every one of the
bottom rails so that they are all equal in gap size.
9
10
8
