No Diving or Jumping. Observe all Safety Rules
2-2
GENERAL INSTRUCTIONS - ROUND POOLS
ASSEMBLING THE POOL BASE
Section
1
Section
2
A. CONT. ASSEMBLING POOL BASE
3. Spread out Brick Sand
A.
Spread a layer of fine brick sand (no pebbles) over the
foundation area, 2” (5 cm) deep. Use a rake to make the
brick sand flat and smooth.
(Image 4)
4 Proceed to Section 3
-Assembling Pool wall and Liner
4
Important Note:
Spread brick sand or sheets of styrofoam out over the entire
pool foundation area inside the base rails. This provides a
protective surface for the pool liner to rest on.
