No Diving or Jumping. Observe all Safety Rules
4-1
GENERAL INSTRUCTIONS - BRACELESS OVAL POOLS
ASSEMBLING THE POOL FRAME
A. INSTALLATION OF THE UPRIGHTS - Straight Section
Section
4
1. Install the uprights - straight section
NOTE: The wall joint is hidden behind the upright
on most pools. This assures that the skimmer and
skimmer return holes are not obstructed.
a. Before installing the uprights, slide onto each
upright, from the base, a base crown.
(Image 1)
b. Insert the straight section upright into the vertical
sleeve.
(Image 2)
c. The upright is properly positioned when the
bottom plate is inserted into the notch at the lower
end of the upright.
(Images 3 & 4)
d. Once the upright is installed, slide the base
crown all the way to the bottom of the upright.
(See Images 7 & on page 2 of this Section)
e. Proceed with the installation of all the straight
section uprights..
Important Note:
Ensure to leave a gap between the two bottom rails.
See Diagram:
Please refer to your pool’s footprint (Section 1, pg11) for gap
measurement.
2
3
1
4
