DP-SW20 User Manual
Getting Connected
48
© 2008 Pirelli Broadband Solutions S.p.A. All Rights Reserved.
6.3
B
EAM
This function allows your phone to receive data beamed from other devices.
Note:
By default the option to receive incoming beams is disabled for security and battery
saving reasons. Make sure that “
Receive incoming beams
” is enabled in
Start >
Settings > Connections
> Beam
.
6.3.1
T
O
B
EAM AN
I
TEM
U
SING
I
NFRARED
In the Calendar, Contacts, Notes, Tasks, and Pictures & Videos, you can beam files and
information to other devices using Infrared.
1.
From the program, select the item you want to beam, such as an appointment in
Calendar, a task in Tasks, a contact card in Contacts, or a picture in Pictures, In
Calendar, first open the appointment in Agenda view.
2.
Click
Menu > Beam
[type of item]. In the contacts application, you should go to
Menu
> Send Contact > Beam
.
3.
Align the IR ports at close range until the target device name appears, and then select
the device to which you want to send the item.
4.
Click
Beam
.
6.4
U
SING
W
I
-F
I
To use Wi-Fi on your device, you need access to a wireless access point of your service
provider. When you are in public places such as in a coffee shop or restaurant, you will need
access to their public wireless access points (also referred to as “hotspots”).
Note:
The availability and range of your device‟s Wi-Fi signal depends on the number,
infrastructure, and other objects through which the signal passes.
6.4.1
T
O
C
HECK THE
W
I
-F
I STATUS
●
In the title bar
. When you enable Wi-Fi on your device, the Wi-Fi available icon (
) will
appear on the title bar. After Wi-Fi is turned on, your device begins to scan for available
wireless networks and the icon (
) will appear on the title bar. Once connected the icon
( ) will appear on the title bar.
●
Wireless Manager screen
. Enter the Wireless Manager screen to check for the Wi-Fi
status.
●
Today screen
. You can see the Wi-Fi status displayed on the Today screen.
