LIMITED WARRANTY:
pIpER pRoDucTs warrants to the original purchaser parts and
labor for a period of twelve (12) months from the date of purchase. see manufacturer’s complete
warranty for details.
It is our policy to build equipment which is design certified by companies that have been
accredited at the Federal Level by the occupational safety and Health Agency (osHA) and
ANsI as a National Recognized Testing Laboratory. These companies include csA International,
underwriters Laboratories, and the National sanitation Foundation. However, a continuing
program of product improvement makes it necessary to submit new models to the agencies as
they are developed. consequently, all models may not bear the appropriate labels at all times.
We reserve the right to change specifications and product design without notice. such revisions
do not entitle buyer to corresponding changes, improvements, additions or replacements for
previously purchased equipment. Information is not for design purposes.
SPEC
D I S P E N S E R S
D I S P E N S E R S
E L I T E 5 0 0
E L I T E 5 0 0
STEAM TABLES
STEAM TABLES
SUPPORT EQUIPMENT
SUPPORT EQUIPMENT
D R O P - I N S
D R O P - I N S
JOB__________ ITEM # __________ QTY # __________
MODEL NUMBER
300 S. 84th Avenue
Wausau, WI 54401
Phone: 800-544-3057
Fax: 715-842-3125
www.piperonline.net
F-15
1500-HPSC-2-48
R
R
2A40-RI-48
R
R
725-1
R
R
1500-HPSC-2-48
Correctional Hot/Cold
Tray Delivery System
Piper's Tray Delivery System is designed as a hot/cold
tray transport cabinet. The cabinet, rack and dolly are
ruggedly constructed for heavy duty use and for optimum
performance in the delivery of pre-trayed hot/cold meals.
MODEL 1500-HPSC-2-48 HOT/COLD TRAY
DELIVERY CART
CABINET
This fully insulated cabinet is constructed of heavy
gauge stainless steel and is mounted on a stainless steel
covered rust inhibited steel base. The cabinet and base
assembly is designed to provide extreme rigidity. The
base extends beyond the cabinet and is furnished with
heavy duty corner bumpers at the top and base to protect
both the cabinet and the walls. The top extends at the
front only, to shield the doors. A recessed reinforced
push/pull handle is provided at one end of the cabinet.
The cabinet has two compartments which are separated
by an insulated divider panel. One compartment is
intended for cold food and can be equipped with two
eutectic chill plates; the other compartment is heated but
can also be used for cold foods. Guides are provided on
the cart for alignment of the dolly and rack.
DOORS
Two doors are provided, constructed of stainless steel
and fully insulated. Each door is mounted on three
heavy duty sanitary hinges and opens a full 270 degrees.
A stainless steel full-perimeter gasket and a heavy duty
latch are provided on each door. In addition, a single
extra heavy duty security latch, wide enough for both
doors, is mounted on the top of the cabinet and has
provision for a padlock.
CASTERS
The unit is mounted on four 8” diameter, heavy duty, high
modulus casters. Two casters are rigid, two are swivel and
equipped with brakes.
HEATINg SYSTEM
The heating system is contained in a lift-out module which
fits into an opening in the bottom of the cabinet. It is easily
removable for convenient serviceability, allowing for the
cabinet interior to be hosed down for cleaning, but is locked
in place when the door is closed. It includes high efficiency
heating elements rated at 1500 watts, and a blower system
designed for even heat distribution and fast recovery. The
blower motor is thermally protected and has self-lubricated
bearings. The heat module’s front control panel includes
a switch, an adjustable full range thermostat, two pilot
lights and a power cord equipped with a NEMA 5-15P plug.
Electrical draw is 12.6 amps. at 120 volts, 60 hz., single phase.
Operating temperatures are up to 200 degrees F. Pre-heat
time is approximately 20 minutes.
MODEL 2A40-RI-48 TRAY RACK
The two bank rack is constructed of all welded stainless steel
and is mounted on four 2" heavy duty, high temperature rigid
casters. A stainless steel holder is provided on the top of the
rack to hold the optional eutectic chill plate. Twelve sets of
angle tray guides are provided in each bank. Spaced on 3”
centers, they hold two trays per set for a total capacity of 48
trays. The rack can accommodate Temp-Tech, Cambro, Design
Specialty or Jones Zylon trays. Must be specified at the time
of the order.
MODEL 725-1 TRANSPORT DOLLY
The dolly is constructed of all welded heavy gauge stainless
steel and is mounted on four 5” swivel casters, two with
brakes. Two comer bumpers are provided at the front of the
dolly to protect the cabinet. A special heavy duty latching
mechanism is mounted on the handle to secure the rack in
place. Guides are provided on the dolly for alignment of the
rack and dolly.
OPTION
MRCE - 5-year compressor warranty
R
R
Model
Width
Depth
Height
Model 1500-HPSC-2-48 Cart
60"
30-1/2"
63-3/4"
Model 2A40-RI-48 Tray Rack
22-1/4"
22"
40-1/2"
Model 725-1 Transport Dolly
23"
29-1/2"
42-1/2"
NOTE: All dimensions are overall, including bumpers and push handle.
180
