1-800-433-6026
Never Leave Cooking Unattended.
E. Installation: F. Operation
⃰
IMPORTANT:
Microwave oven vents are designed and slanted to expel exhaust in
a specific direction. It is important that the magnetic sensor be
positioned in the pathway of the air flow from the exhaust vent to
ensure that the exhaust expelled from the microwave passes directly
over/into the sensor. For example, if the vent is slanted upward place
the sensor above the vent. On the other hand, if the vent is slanted
downward place the sensor below the vent.
1. The LEDs on the magnetic sensor and the control box will turn from
red to blue after power is connected. This indicates that the sensor
is monitoring the microwave and functioning properly.
2. When a potentially dangerous situation is detected by the magnetic
sensor, it will interrupt power to the microwave. The sensor will beep for
a few seconds and the LEDs on the sensor and the control box will turn
from blue to red, indicating that the cooking process has been stopped.
The power to the microwave will be restored automatically after the
sensor detects that the area around the exhaust vent has cleared. The
LEDs on the sensor and the control box will then turn from red to blue.
Cooking will NOT resume until the microwave is attended to by the user.
3. If the sensor has activated and interrupted power to the
microwave, DO NOT open the microwave door. Visually check the
microwave to ensure it is clear. Wait until it is safe to remove the
contents.
G. Cleaning and Care
1. Unplug SmartMicro from the wall outlet.
2. Use a slightly damp cloth to clean the sensor and /or control box
Allow to dry.
3. Plug SmartMicro back into the wall outlet.
4. Never submerge the sensor or control box in water or put in the
dishwasher.
SmartMicro and the microwave should be inspected periodically
to ensure proper operation and optimum performance.
Ensure
that the blue LEDs on the sensor and control box are lit, this
indicates that the unit is receiving power. Ensure too that the vent
slots on the microwave are free from any debris or obstruction.
1. The SmartMicro product and the microwave oven should be placed in
a clean air environment for the installation.
2. Unplug the microwave oven power cord from its power supply.
3. Put the SmartMicro sensor above the microwave oven vent.⃰
4. Plug the SmartMicro control box into a wall outlet.
5. Plug the microwave oven power cord into the SmartMicro control box.
6. Wait until the SmartMicro sensor LED turns blue.
7. Once the LED on the sensor turns blue the microwave oven is ready
to be used.
