24
YPM-2306ZF
7.1.2 DISASSEMBLY
-
Removing the Upper Frame
1. Remove six Springs A, two Springs B and four
Screws.
2. Remove two Tabs situated on rear side of the Upper
Frame, remove two Arms on the front side, then
remove two Tabs on the front side.
-
Removing the Carriage Mechanism Section
1. Disengage the Carriage Mechanism from the two
dampers situated in the front side by driving it up,
then disengage and remove the mechanism from the
two dampers by driving it up aslant into front side
direction.
Note : When assembling the Carriage Mechanism, coat
the dampers with alcohol prior to the assembly.
-
Removing the Clamp Arm Assy Section
1. Remove a Spring A, a B and a Spring C.
2. Drive the Clamp Arm Assy up into rear side direction,
then disengage the arm from its current position
Finally, drive the assembly approximately 45 degrees
upward, then slide the assembly toward right side to
remove it.
B
A
B
A
A
A
Arm
Arm
A
B
C
Upper Frame
Carriage Mechanism Section
Clamp Arm Assy Section
A
A
Summary of Contents for YPM-2106ZF
Page 3: ...YPM 2306ZF 2 EXPLODED VIEWS AND PARTS LIST 2 1 CD MECHANISM MODULE 3 ...
Page 11: ...11 YPM 2306ZF ...
Page 13: ...13 YPM 2306ZF 1 2 3 4 1 2 3 4 D C B A SIDE B A CLAMP CONTROL UNIT S8 A ...
Page 19: ...19 YPM 2306ZF Grating waveform Ech Xch 20mV div AC Fch Ych 20mV div AC 45 0 75 60 30 90 ...
