Engb
8
Attachment of the CP-XY12HC1 Horizontal Flying Cradle
Using the supplied M10 socket head bolts, align the mounting holes in the end
mounts of the yoke with the mounting points on the top and the bottom of the
enclosure. Ensure that both the flat and locking washers are used — the flat washer
should be in contact with the cradle. Tighten the bolts to ensure a solid fit. Once the
desired angle of the loudspeaker is set, tighten the levers on the cradle to lock the
position in place. The points on the top of the flying cradle can be used for perma-
nent installations or to secure a hook clamp.
Ensure that an M10 eyebolt is secured to the rear point on the XY-122 enclosure to
use as a secondary safety feature.
Attachment of the CP-XY12AB1 Variable Angle Bracket
Using the supplied M10 socket head bolts, align the mounting holes in the flying
bracket with the mounting points on the top or the bottom of the enclosure. Ensure
that both the flat and locking washers are used — the flat washer should be in
contact with the cradle. Tighten the bolts to ensure a solid fit. Finally, attach a hook-
clamp to the mounting point.
The flying bracket works on the centre of gravity of the XY-122. Moving the pickup
point to the rear of the enclosure will add down-tilt, and moving to the front of the
enclosure will apply up-tilt. For larger down-tilt angles, position the pivot on the last
hole and use the point on the rear or underside as a pull-back.
Ensure that an M10 eyebolt is secured to the rear point on the XY-122 enclosure to
use as a secondary safety feature.
