Pioneer XW-SMA1 Operating Instructions Manual Download

Page: 30 / 48

iPod/iPhone/iPad playback

Connecting your iPod/iPhone/iPad

Caution

• When connecting iPod/iPhone/iPad units, always use

the Dock Connector to USB Cable provided with iPod/
iPhone/iPad units, or a commercially available Dock
Connector to USB cable

designed to support iPod/

iPhone/iPad.

• This unit does not provide the Dock Connector to USB

cable.

Open the terminal cover (XW-SMA3 only).

Connect your iPod/iPhone/iPad.

Playing your iPod/iPhone/iPad

Caution

• When your iPod/iPhone/iPad is connected to this unit

and you wish to operate the iPod/iPhone/iPad directly,
be sure to hold the iPod/iPhone/iPad steady with the
other hand to prevent malfunctions due to faulty
contacts.

Connect your iPod/iPhone/iPad.

Press input to select iPod as the input

source.

The

input

indicator of the unit lights red.

The following operations are possible for iPod/iPhone/iPad.

Important

• If this unit cannot play your iPod/iPhone/iPad, perform

the following troubleshooting checks:
• Check whether the iPod/iPhone/iPad is supported by

this unit.

• Reconnect the iPod/iPhone/iPad to the unit. If this

doesn’t seem to work, try resetting your iPod/iPhone/
iPad.

• Check the iPod/iPhone/iPad software is supported by

this unit.

• If the iPod/iPhone/iPad cannot be operated, check the

following items:
• Is the iPod/iPhone/iPad connected correctly?

Reconnect the iPod/iPhone/iPad to the unit.

• Is the iPod/iPhone/iPad experiencing a hangup? Try

resetting the iPod/iPhone/iPad, and reconnect it to the
unit.

Tip

• When the unit’s power is turned ON, the iPod/iPhone/

iPad connected to the unit will be charged.

• When this unit is running by the built-in battery, iPod/

iPhone/iPad is not charged (XW-SMA3 only).

• When input is switched from iPod to another function,

the iPod/iPhone/iPad’s power will be turned off
automatically.

• If the unit is set to standby when an iPod/iPhone/iPad is

connected, the iPod/iPhone/iPad will be turned off
automatically.

• When no device is connected to the

iPod/iPhone/iPad

connector, if the unit is not operated for 20 minutes or
more, the unit’s power will automatically turn OFF.

network setup
wireless direct

AUX IN

DC IN 15 V

iPod/iPhone/iPad

LAN(10/100)

Chief Speaker Engineer

SOUND TUNED

BY ANDREW JONES

iPod/iPhone/iPad

Button

What it does



(play/

pause)

Press to start playback. During playback,
pause/unpause playback.



(prev)

Press to return to the beginning of the currently
playing track or file. Press twice to move back to
the beginning of the previous track or file.



(next)

Press during playback to skip ahead to the
beginning of the next track or file.

input

Switches to the previous input.

vol –/+
(volume –/+)

Use to set the listening volume.

Summary of Contents for XW-SMA1

















































Search results

Summary of Contents for XW-SMA1

Reviews:

Related manuals for XW-SMA1

Brands by name

Popular brands

Pioneer XW-SMA1, Operating Instructions Manual

Search results

Summary of Contents for XW-SMA1

Reviews:

Related manuals for XW-SMA1

Brands by name

Popular brands