Getting started
03
29
En
Play display 2
1
Chase playback, simultaneous record/playback,
copy, disc back-up
Indicates that recording, copying or back-up is in
progress.
2
Elapsed chapter time
3
Total running time of chapter
4
Data transfer rate
Shows the current data rate being read from the disc.
5
Copy protected material (!)
Shows ‘
!
’ if the playback material is copy-once protected.
Recording display
1
Current title number
2
Elapsed recording time
3
Timer recording start and stop times
Shows the start and stop times if the current recording is
a timer recording.
4
Remaining recording time available
Shows the amount of space left on the disc in the current
recording mode.
5
Recording mode
Shows the current recording mode (
FINE
,
SP
,
LP
, etc.),
and the total recording time of the disc.
Note
• When using the simultaneous play and record
feature, the display shows information for playback
only.
• During real-time copy, the copy source playback
information is displayed.
• Data transfer rate shows the amount of video and
audio information recorded on the disc. It is not an
indication of picture/audio quality.
• The Video mode disc displays become the same as a
DVD-Video disc once the disc is finalized.
• The total recording time figure shown in parenthesis
is calculated based on a 12cm/4.7GB disc at the
displayed record setting.
• Recording and playback times for TV recordings are
approximately 0.1% shorter than the actual time. This
is because of the slightly different frame rates of TV
broadcasts versus DVD.
• The frame number is shown next to the elapsed time
display when the disc is paused.
•
Copy Once
or
Can’t Record
messages may appear
in the stop or recording displays. These indicate that
the broadcast TV program contains copy control
information.
Listening to an external audio source
You can connect both analog and digital external audio
sources to this system. Digital audio sources include
digital satellite receivers, CD recorders, etc. Analog
sources include tape decks and turntables (used with a
suitable phono pre-amp). See also
Connecting auxiliary
components
on page 121.
1
If the system isn’t already on, press
STANDBY/
ON to switch on.
Also make sure that the external source (TV, satellite
receiver, etc.) is switched on.
2
Use the AUDIO INPUT button to select an audio
input source.
3
If necessary, start playback of the external
source.
Play
DVD-R Video
Title Name
21/11 Football match
:
Chapter Total
Chapter Time
3–2
0. 00. 15
!
0. 00. 21
0. 01. 52
4.32Mbps
Hi-Speed Copy
5
2 3
4
1
Rec
DVD-R Video
FINE (1h00m/DVD)
Rem.
0h35m
21:00 – 22:00
3
0. 00. 15
Copy Once
DVD Mode
Stereo
ABC Pr 1
5
1
2
3
4
STANDBY/ON
AUDIO INPUT
DIG/ANA
DIGITAL
ANALOG
PT-RW_UK.book 29 ページ ２００４年７月２６日 月曜日 午後３時４１分
