Pioneer X-HM72-K Operating Instructions Manual Download Page 17

Page: 17 / 63

Music playback using

Bluetooth

wireless technology

The unit is capable of playing back music stored on

Bluetooth

capable devices (cell phones, digital music players etc.)

wirelessly. You can also use a

Bluetooth

audio transmitter

(sold separately) to enjoy music from devices that do not have

Bluetooth

functionality. Please refer to the user’s manual for

your

Bluetooth

capable device for more details.

Note

•

The

Bluetooth

word mark and logos are registered

trademarks owned by Bluetooth SIG, Inc. and any use of

such marks by PIONEER CORPORATION is under license.

Other trademarks and trade names are those of their

respective owners.

•

The

Bluetooth

wireless technology enabled device must

support A2DP profiles.

•

Pioneer does not guarantee proper connection and

operation of this unit with all

Bluetooth

wireless technology

enabled devices.

Remote control operation

The remote control supplied with this unit allows you to play

and stop media, and perform other operations.

Note

•

The

Bluetooth

wireless technology enabled device must

support AVRCP profiles.

•

Remote control operations cannot be guaranteed for all

Bluetooth

wireless technology enabled devices.

Pairing with the unit (Initial registration)

In order for the unit to playback music stored on a

Bluetooth

capable device, pairing must first be performed. Pairing

should be performed when first using the unit with the

Bluetooth

capable device, or when the pairing data on the

device has been erased for any reason.
Pairing is a step required to allow communication using

Bluetooth

wireless technology to be carried out.

•

Pairing is only performed the first time that you use the unit

and the

Bluetooth

capable device together.

•

In order to allow communication using

Bluetooth

wireless

technology to take place, pairing must be performed on

both the unit and the

Bluetooth

capable device.

•

After pressing the

BT AUDIO

and switching to

BT Audio

function, perform the pairing procedure on the

Bluetooth

capable device. If pairing has been performed correctly,

you will not need to perform the pairing procedures for the

unit as shown below.

Please refer to the user’s manual for your

Bluetooth

capable

device for more details.

Press the STANDBY/ON and turn the power to the unit
on.

Press the BT AUDIO.

The unit switches to

BT Audio

and “Waiting device” will be

displayed.

•

Waiting device

Turn on the power to the

Bluetooth

capable device that

you wish to pair with, and perform pairing procedure on
it.

Note

•

This unit will be displayed as “XC-HM72/HM82” on all

Bluetooth

capable devices that you have.

Pairing will start.

•

Place the

Bluetooth

capable device close to the unit.

•

Please refer to the user’s manual for your

Bluetooth

capable device for details on when pairing can be

performed and the procedures required for pairing.

•

When PIN code entry is requested, enter “

0000

.” (This unit

does not accept any PIN code setting other than “

0000

.”)

Confirm on the

Bluetooth

capable device that pairing

has been completed.

If pairing with the

Bluetooth

capable device has been

completed correctly “Connected“ will be displayed.

PHONES

5 V

2.1 A

AUDIO IN

TIMER

STANDBY/ON

OPEN/CLOSE

SLEEP

TIMER

DIMMER

SOUND

P.BASS

TREBLE

BASS

CD DISP

BAND

TUNER

AUDIO IN

iPod/USB

NET SERVICE FAVORITES

M.SERVER

BT AUDIO

DIG IN

LINE 1/2

VOLUME

iPod

CONTROL

TOP

TUNE

INPUT

Remote control operation

Device not equipped with

Bluetooth

wireless technology:

Digital music player

Bluetooth

wireless technology audio

transmitter (commercially available)

Bluetooth

wireless technology enabled device:

Digital music player

Bluetooth

wireless technology enabled device:

Cell phone

BT Audio

Waiting Device

Summary of Contents for X-HM72-K
































































Search results

Summary of Contents for X-HM72-K

Reviews:

Related manuals for X-HM72-K

Brands by name

Popular brands

Pioneer X-HM72-K, Operating Instructions Manual

Search results

Summary of Contents for X-HM72-K

Reviews:

Related manuals for X-HM72-K

Brands by name

Popular brands