background image

 

Additional information

12

 

80

 

En

 

DTS

 

The DTS technologies are explained below. See 
www.dtstech.com for more detailed information.

 

DTS Digital Surround

 

DTS Digital Surround is a 5.1-channel audio coding system 
from DTS Inc. now widely used for DVD-Video, DVD-Audio, 
5.1 music discs, digital broadcasts, and video games. It can 
deliver up to six discrete audio channels, comprising five full 
range channels, including an LFE channel. Higher sound 
quality is achieved through the use of a low compression 
rate, and high rates of transmittance during playback.

 

DTS-ES

 

DTS-ES (the ES stands for Extended Surround) is a decoder 
that is capable of decoding both DTS-ES Discrete 6.1 and 
DTS-ES Matrix 6.1 encoded sources. DTS-ES Discrete 6.1 
gives ‘true’ 6.1 channel sound, with a completely separate 
(discrete) surround back channel. DTS-ES Matrix 6.1 has a 
surround back channel matrixed into the surround left/right 
channels. Both sources are also compatible with a 
conventional DTS 5.1 channel decoder.

 

DTS Neo:6

 

DTS Neo:6 can generate 6.1 channel surround sound from 
any matrixed stereo source (such as video or TV) and from 5.1 
channel sources. It uses both the channel information 
already encoded into the source, as well as its own 
processing to determine channel localization (with two 
channel sources, the “.1” subwoofer channel is generated by 
bass management in the receiver). Two modes (Cinema and 
Music) are available using DTS Neo:6 with two channel 
sources.

 

DTS 96/24

 

DTS 96/24 is an extension of the original DTS Digital 
Surround which offers high quality 96 kHz/24-bit audio using 
a DTS 96/24 decoder. This format is also fully backward 
compatible with all existing decoders. This means that DVD 
players can play this software using a conventional DTS 5.1 
channel decoder.

 

DTS-EXPRESS

 

DTS-EXPRESS

 

 

 

is a low-bitrate encoding technology 

supporting up to 5.1 channels with fixed data transfer rates. 
This format is incorporated with sub audio on HD DVD and 
secondary audio on Blu-ray Disc while boasting the potential 
applicability to upcoming broadcasts and memory audio 
contents.

 

DTS-HD Master Audio

 

DTS-HD Master Audio is a technology that delivers master 
audio sources recorded in a professional studio to listeners 
without any loss of data, preserving audio quality. DTS-HD 
Master Audio adopts variable data transfer rates, facilitating 
data transfer to the maximum rate of 24.5 Mbps in the 
Blu-ray disc format, 18.0 Mbps in the HD-DVD format, which 
by far exceeds that of a standard DVD. These high data 
transfer rates enable lossless transmission of 96 kHz/24-bit 
7.1-channel audio sources without deteriorating the quality 
of the original sound. DTS-HD Master Audio is an 
irreplaceable technology that can reproduce sound faithfully 
as intended by the creator of music or movies.

 

“DTS” is a registered trademark of DTS, Inc. and “DTS-HD 
Master Audio” is a trademark of DTS, Inc.

 

Windows Media

 

TM

 

 Audio 9 Professional

 

Windows Media

 

TM

 

 Audio 9 Professional (WMA9 Pro) is a 

discrete surround format developed by Microsoft 
Corporation. 

WMA9 Pro can support up to 5.1/7.1 channel playback with 
sampling rates up to 24-bit/96 kHz. Using the unique WMA 
compression techniques, WMA9 Pro can deliver 
multichannel music and soundtracks over high-speed 
internet networks at low bit rates with minimal audio 
degradation. Playback may be enjoyed with the Windows 

Media

 

TM

 

 Player 9 Series (or above) and other third-party 

media players on a personal computer, or with an AV 
amplifier with on-board WMA9 Pro decoding.

 

Windows Media

 

TM

 

 and the Windows logo are trademarks or 

registered trademarks of Microsoft Corporation in the United 
States and/or other countries.

 

About THX

 

The THX technologies are explained below. See 
www.thx.com for more detailed information.

VSX-9120TXH_KU.book 80 ページ 2007年4月12日 木曜日 午前11時47分

Summary of Contents for VSX9120TXHK - 770w 7.1 Channel Dolby Truehd

























































































Reviews: