background image

The exclamation point within an equilateral 
triangle is intended to alert the user to the 
presence of important operating and 
maintenance (servicing) instructions in the 
literature accompanying the appliance.

The lightning flash with arrowhead symbol, 
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s 
enclosure that may be of sufficient
magnitude to constitute a risk of electric 
shock to persons.

CAUTION:

TO PREVENT THE RISK OF ELECTRIC 
SHOCK, DO NOT REMOVE COVER (OR 
BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

IMPORTANT

D3-4-2-1-1_A1_En

WARNING

This equipment is not waterproof. To prevent a fire or
shock hazard, do not place any container filled with
liquid near this equipment (such as a vase or flower 
pot) or expose it to dripping, splashing, rain or
moisture.

D3-4-2-1-3_A1_En

WARNING

Before plugging in for the first time, read the following
section carefully.

The voltage of the available power supply differs
according to country or region. Be sure that the 
power supply voltage of the area where this unit 
will be used meets the required voltage (e.g., 230 V 
or 120 V) written on the rear panel.

D3-4-2-1-4*_A1_En

WARNING

To prevent a fire hazard, do not place any naked flame
sources (such as a lighted candle) on the equipment.

D3-4-2-1-7a_A1_En

VENTILATION CAUTION

When installing this unit, make sure to leave space 
around the unit for ventilation to improve heat radiation 
(at least 60 cm at top, 10 cm at rear, and 30 cm at each
side).

WARNING

Slots and openings in the cabinet are provided for 
ventilation to ensure reliable operation of the product,
and to protect it from overheating. To prevent fire
hazard, the openings should never be blocked or
covered with items (such as newspapers, table-cloths, 
curtains) or by operating the equipment on thick carpet
or a bed.

D3-4-2-1-7b*_A1_En

VSX-RS320_DWXCN.book  2 ページ  2010年4月2日 金曜日 午後5時46分

Summary of Contents for VSX-RS320-k













































Reviews: