Connecting your equipment
03
17
En
English
Plugging in the receiver
Only plug in after you have connected all your
components, including the speakers.
• Handle the power cable by the plug. Do not pull out
the plug by tugging the cable and never touch the
power cable when your hands are wet as this could
cause a short circuit or electric shock. Do not place
the unit or a piece of furniture, etc., on the power
cable, or pinch the cable. Never make a knot in the
cable or tie it with other cables. The power cables
should be routed such that they are not likely to be
stepped on. A damaged power cable can cause a fire
or give you an electrical shock. Check the power
cable once in a while. When you find it damaged, ask
your nearest Pioneer authorized service center or
your dealer for a replacement.
1
Plug the supplied power cable into the AC IN
socket on the back of the receiver.
2
Plug the other end into a power outlet.
NECTOR
AC IN
STB IN
DVR/TV IN/OUT
vsx-c402_MY.book 17 ページ ２００４年２月６日 金曜日 午後７時１９分
