Connecting your equipment
03
16
En
Using this receiver with a Pioneer
plasma display
If you have a Pioneer plasma display, you can use an
SR+ cable (see note below) to connect it to this unit and
take advantage of various convenient features, such as
automatic video input switching of the plasma display
when the input is changed.
• If you connect to a Pioneer plasma display using an
SR+ cable, you will need to point the remote control
at the plasma display remote sensor to control the
receiver. In this case, you won’t be able to control the
receiver using the remote control if you switch the
plasma display off.
• This receiver is compatible with all Pioneer plasma
displays from 2003 onward.
•
Use a 3-ringed miniplug SR+ cable to connect the
CONTROL IN jack of this receiver with the CONTROL
OUT jack of your plasma display.
Before you can use the extra SR+ features, you need to
make a few settings in the receiver. See
Using the SR+
mode with a Pioneer plasma display
on page 35 for
detailed instructions.
To make the most of the SR+ features, you should
connect your source components (DVD player, etc.) in a
slightly different way to that described in this chapter. For
each component, connect the video output directly to the
plasma display, and just connect the audio (analog and/
or digital) to this receiver.
• The 3-ringed SR+ cable from Pioneer is commer-
cially available under the part number ADE7095-A.
Contact the Pioneer Customer Support division for
more information on obtaining an SR+ cable.
COAX
CONTROL
AV CONNECTOR
DVD IN
VIDEO IN/OUT
FM UNBAL 75
Ω
AM LOOP
ANTENNA
IN
OUT
SUB
WOOFER
OUT
STB
(DVD)
OPT1
DVR/TV
OPT2
DVD
(STB)
DIGITAL IN
R
L
R
SURROUND
SURROUND
PREOUT
OUT
CONTROL
Pioneer plasma
display
DVD player
VSX-C402
Pioneer plasma
display
Satellite receiver, etc
VIDEO
INPUT 1
VIDEO
INPUT 2
TV/SAT
AUDIO IN
DVD
AUDIO IN
STANDBY/ON
OPEN/CLOSE
AUDIO/VIDEO MULTI-CHANNEL RECEIVER
VSX-C402
STANDBY/ON
FRONT INPUT
DIGITAL IN
VIDEO
AUDIO
R
L
vsx-c402_MY.book 16 ページ ２００４年２月６日 金曜日 午後７時１９分
