Pioneer VSX-AX2AS-S Operating Instructions Manual Download

Page: 49 / 92

Other connections

Use the

buttons to browse the selected

category (e.g., albums).

• Use

to move to previous/next levels.

Continue browsing until you arrive at what you

want to play, then press

to start playback.

Navigation through categories on your iPod looks like
this:

Playlist

Song

Artist

Album

Song

Album

Song

Song
Genre

Artist

Album

Song

Composer

Album

Song

Shuffle Songs

Tip

• You can play all of the songs in a particular category

by selecting the

All

item at the top of each category

list. For example, you can play all the songs by a
particular artist.

Basic playback controls

The following table shows the basic playback controls for
your iPod:

Watching photos and video content

To view photos or video on your iPod, since video control
is not possible using this receiver, you must use the main
controls of your iPod instead.

Press

PHOTO

to switch to the iPod controls for

photo and video playback.

The receiver controls will be unavailable while you are
watching iPod videos or browsing photos.

Press

PHOTO

again to switch back to the receiver

controls when you’re done.

iPod® is a trademark of Apple Computer, Inc., registered in
the U.S. and other countries.

Note

1 If you’re in the song category, you can also press

ENTER

to start playback.

Button

What it does

Press to start playback.
If you start playback when something other
than a song is selected, all the songs that fall
into that category will play.

Press to stop playback.

Pauses playback, or restarts playback when
paused.

Press and hold during playback to start scanning.

Press to skip to previous/next song.

Press repeatedly to switch between

Repeat

One

Repeat All

and

Repeat Off

Press repeatedly to switch between

Shuffle

Songs

Shuffle Albums

and

Shuffle Off

DISP

Press repeatedly to change the song playback
information displayed.

During playback, press to skip to previous/next
playlist; when browsing, press to move to
previous/next levels.

TOP MENU

Press to return to the

iPod Top

menu screen.

RETURN

Press to return to the previous level.

VSX_AX4ASi.book.fm 49 ページ２００６年４月１１日　火曜日　午後４時１９分

Summary of Contents for VSX-AX2AS-S





























































































Search results

Summary of Contents for VSX-AX2AS-S

Reviews:

Related manuals for VSX-AX2AS-S

Brands by name

Popular brands

Pioneer VSX-AX2AS-S, Operating Instructions Manual

Search results

Summary of Contents for VSX-AX2AS-S

Reviews:

Related manuals for VSX-AX2AS-S

Brands by name

Popular brands